H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 106)

15-4
Figure 15-3 Create an interface
Table 15-1 describes the configuration items of creating an interface.
Table 15-1 Configuration items of creating an interface
Item Description
Interface Name Set the type and number of a logical interface.
VID
If you are creating a Layer 3 Ethernet subinterface, set the VLANs associated with the
subinterface.
This parameter is available only for Layer 3 Ethernet subinterfaces.
Currently, this configuration item is not configurable because the device does not support
Layer 3 Ethernet subinterfaces.
MTU
Set the maximum transmit unit (MTU) of the interface.
The MTU value affects fragmentation and reassembly of IP packets.
Support for this configuration item depends on the interface type.
TCP MSS
Set the maximum segment size (MSS) for IP packets on the interface.
The TCP MSS value affects fragmentation and reassembly of IP packets.
Support for this configuration item depends on the interface type.