H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 230)

27-5
Figure 27-3 Static domain name resolution configuration page
Figure 27-4 Create a static domain name resolution entry
Table 27-4 describes the static name resolution entry configuration items.
Table 27-4 Static name resolution entry configuration items
Item Description
Host Name
Host IP Address
Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the last configured one takes effect.
You can create up to 50 static host name-to-IP address mappings.
Return to Static name resolution table configuration task list .
Configuring Dynamic Domain Name Resolution
Select Network > DNS from the navigation tree and then click the Dynamic tab to enter the page
shown in Figure 27-5 .