H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 432
37-10
# Configure a local user.
Select Authentication > Users from the navigation tree. The Local User page appears, as shown
in
. Click Add and then configure the local user as shown in
Figure 37-7 Add a local user
Figure 37-8 Configure the local user
Enter telnet as the username.
Enter abcd as the password.
Enter abcd to confirm the password.
Select Telnet as the service type.
Click Apply.
# Configure ISP domain test.
Select Authentication > AAA from the navigation tree. The Domain Setup page appears, as
shown in
.
This manual is related to the following products: