39 local eap service, Overview, Configuring local eap service – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 454: Pv2. refer to, Local eap, Service, Local eap service
39-1
39
Local EAP Service
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
In some simple application environments, you may want to use an access device to authenticate users
locally, instead of deploying AAA servers for user authentication. In this case, if the Extensible
Authentication Protocol (EAP) is used for user access authentication, you need to configure the local
EAP authentication server to cooperate with local authentication method of AAA for local EAP
authentication. For details about AAA, refer to
Configuring Local EAP Service
Select Authentication > Local EAP Server from the navigation. The Local EAP service configuration
page appears, as shown in
Figure 39-1 Local EAP service configuration page