beautypg.com

Displaying ap detailed information – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 71

background image

7-10

Field

Description

Failed RTS

Number of RTS failed during transmission

Successful RTS

Number of RTS transmitted successfully

Failed ACK

Number of transmitted frames for which no acknowledgement is
received

Association Frames

Number of association responses transmitted

Packet Count Statistics Based on Size

Number of frames counted based on the frame size. The frame size
falls in the following four ranges:

size < 128

128 < size < 512

512 < size < 1024

size > 1024

Packet Count Statistics Based on Rate

Numbers of frames counted separately based on their transmit
rates: 802.11a, 802.11b, or 802.11g. Only the numbers of frames
counted based on the data rates supported by the radio of the AP
are displayed. For example, if the radio supports 802.11a, the
number of 802.11a frames is displayed, and numbers of 802.11b
and 802.11g frames will not be displayed.

Packet Count Statistics Based on MCS
Rate

Numbers of frames counted separately based on their MCS rates.
If the device does not support 802.11n, this field will not be
displayed.

Received Frames Statistics

Statistics of received frames

Total Frames

Number of frames received

Unicast Frames

Number of unicast frames received

Broadcast/Multicast Frames

Number of broadcast or multicast frames received

Fragmented Frames

Number of fragmented frames received

FCS Failures

Number of frames dropped due to FCS failure

Authentication Frames

Number of authentication requests received

Duplicate Frames

Number of duplicate frames received

Decryption Errors

Number of frames dropped due to decryption error

Association Frames

Number of association requests received

Displaying AP Detailed Information

Select Summary > AP from the navigation tree to enter the AP page, click the Detail tab on the page,

and click the name of the specified AP to view the detailed information of an AP.

The detailed information of an AP is as shown in

Figure 7-9

. For the description of the fields in the AP

detailed information, refer to

Table 7-8

.