H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 452)

38-17
Select the domain name test.
Select the Default AuthN checkbox and then select RADIUS as the authentication mode.
Select system from the Name drop-down list to use it as the authentication scheme.
Click Apply. A configuration progress dialog box appears, as shown in Figure 38-13 .
Figure 38-13 Configuration progress dialog box
After the configuration process is complete, click Close.
# Configure the AAA authorization method for the ISP domain.
Select the Authorization tab.
Figure 38-14 Configure the AAA authorization method for the ISP domain
Perform the following configurations, as shown in Figure 38-14 .
Select the domain name test.
Select the Default AuthZ checkbox and then select RADIUS as the authorization mode.
Select system from the Name drop-down list to use it as the authorization scheme.
Click Apply. A configuration progress dialog box appears.
After the configuration process is complete, click Close.
# Configure the AAA accounting method for the ISP domain, and enable accounting optional.
Select the Accounting tab.