Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 98)

Publication 1757-IN040B-EN-P - March 2002
4-8 ProcessLogix Server Upgrade Procedures
7. Click Move to move the file to the hard drive. Wait for a dialog
box to give a successful move indication, and click OK to exit.
8. Remove the Master Disk from your floppy drive and store it in a
safe place
Restoring the Data
Restoring other ProcessLogix Data
1. Reapply any changes to the system acronym set.
2. Copy any relevant files, such as the history archives, to the
system.
3. Copy any custom displays to the new folder.
4. Re-compile and re-link any custom applications using an
appropriate development environment
5. See Table 4.A on page 4-5 to verify.
Restarting SERVERB and synchronizing
If you are upgrading a non-redundant Server, skip to Importing the
ProcessLogix Server Points Database on page 4-10.
On redundant systems, prior to this step, the SERVERB node should
have been turned off. Perform the following steps to bring SERVERB
back on-line.
1. Power on SERVERB.
IMPORTANT
All work performed in this section occurs on the new
ProcessLogix R400.0 Systems.
A redundant Server pair should have completed
setting up database replication before importing the
Engineering Repository.