Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 146)

Publication 1757-IN040B-EN-P - March 2002
6-12 Additional Redundant Server Procedures
3. In the Save in drop down box, select the
C:\Honeywell\client\qckbld
4. Key in >Stations.qdb< in the File name field and click Save.
5. Wait for the Enable Components dialog box to appear.
a. Under the System/License Details tab, click the down arrow
and select ProcessLogix - R400.0 from the Server drop-down
list.
b. Select the Enable Components tab.
c. Click UnSelect All, then check Static Station and Server.
d. Click OK.
e. A quick Builder prompt stating that you have not selected any
devices appears. Click OK to continue.
f. Wait for Quick Builder to generate the file.
Navigate in Knowledge Builder to Quick Builder
Guide
⇒
Working with Projects
⇒
Enabling and Disabling
Components to add devices to the Quick Builder project.
6. Click Edit
⇒
Add Items to call up the Add Item(s) dialog box.
7. Click the down arrow in the Add items field and click Station.
8. Increment the number in the Number of items to Add field to
equal the number of connected Stations. Each Server counts as a
Station.
9. Key in the desired Use name or Prefix for multiple Stations. (For
example, use STN as the prefix with a numeric variable and
starting with the number 0. If the number of Stations to be
added is three, three Stations named STN0, STN1, and STN2 will
be added.)
10. Click OK to add the items to the project.
11. Click Tools
⇒
Download to call up the dialog box.
12. Click the All Items option.
13. Verify that one Server and two Static Stations are to be loaded.
14. Click OK to initiate the download.
15. Click OK to acknowledge the successful download prompt and
close the dialog box.
16. Click File
⇒
Exit to close Quick Builder.