Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 287)

Publication 1757-IN040B-EN-P - March 2002
Major ProcessLogix Software Components 12-7
Miscellaneous SCADA Component Revisions
Controller, Communication & I/O Firmware
See Table 7.A: Hardware component firmware revision level reference
for R400.0 on page 7-5.
Component Version Example Verification Mechanism
Modicon Netlib 2.1 1. Run NT Explorer.
2. Right click
\winnt\system32\netlib.dll
RSNetworx 3.00.00 1. Double click RSNetworx icon.
2. Click Help \ About RSNetworx.
3. Verify version information.
RSLogix 5 5.00.01 1. Double click RSLogix icon.
2. Click Help \ About RSLogix.
3. Verify version information.
RSLogix 5000 8.02 1. Double click RSLogix icon.
2. Click Help \ About RSLogix.
3. Verify version information.
S9000 Configuration
Tools
(1)
(1) CarbonCopy32 use with Series 9000 Tools: CarbonCopy32 should not be used with the Series 9000 Tools for
engineering purposes. Support for CarbonCopy32 is limited to use solely as a remote diagnosis/troubleshooting
tool. It has not been qualified as a remote operator/engineering interface for ProcessLogix. It has been reported
that it is not possible to remotely load a Data Table nor add any on-line ladder logic line/element to a running
Series 9000 when CarbonCopy32 is used. This appears to be related to CarbonCopy32’s special use of the Shift
key.
200.3
Siemens TF API for
Industrial Ethernet 2.0
RSBizware Batch Contact Rockwell Automation Technical
Support, refer to Rockwell Automation
Technical Support on page P-4