Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide User Manual
Page 35

Publication 1757-IN040B-EN-P - March 2002
Operating System Installation Procedures 2-9
The following Private Networking IP Address scheme can be
utilized for the system to operate:
Non-Redundant or Primary Redundant Server:
NIC 1: 192.168.0.1, NIC 2: 192.168.1.1, NIC 3: 192.168.2.1
Backup Redundant Server:
NIC 1: 192.168.0.2, NIC 2: 192.168.1.2, NIC 3: 192.168.2.2
•
Fill in the appropriate Subnet Mask.
All configurations use a Subnet Mask of 255.255.255.0 and a
blank Default Gatetway.
•
If necessary, fill in the appropriate Default gateway.
•
Click OK to return to the Networking Components window.
19. Click Next.
20. Repeat steps 17 to 19 for additional network cards.
21. At the Workgroup or Computer Domain window:
•
Choose the No, this computer …. option
•
Enter an appropriate WorkGroup Name.
•
Click Next.
22. At this point in the installation, setup will finish installing
Windows 2000. This will take some time depending on your
hardware configuration.
23. At the Completing the Setup Wizard window, remove the
Windows 2000 Server CD and click Finish.
24. The PC will reboot.
25. Continue the installation with Installing Service Pack 2 for
ATTENTION
!
All systems which are configured for this Process
Control System should utilize the same Workgroup
Name for easier operations.