Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 153)

Publication 1757-IN040B-EN-P - March 2002
Additional Redundant Server Procedures 6-19
4. Click New Connection.
5. On the Connection tab, make these entries to have the Station
point to the SERVERB (PLX1B) node:
a. In the Server field, key in or Browse to the Secondary Server
name, SERVERB.
b. Select the Station type as Static Station.
c. Key in >1< as the Static Station Number and click Advanced.
d. Check the Auxiliary setup file checkbox.
e. Browse and navigate to:
C:\Honeywell\Client\Station\default.stn and click Open.
f. On the Displays tab, check the Search subdirectories for
shapes checkbox.
g. Click Add and then Browse and add the following directories.
•
C:\honeywell\client\system\r400
•
C:\honeywell\client\abstract
•
C:\honeywell\client\dspbld
IMPORTANT You must indicate the full path to the .stn file.