Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 156)

Publication 1757-IN040B-EN-P - March 2002
6-22 Additional Redundant Server Procedures
1. Restart the SERVERA node.
2. On the SERVERA node, right-click in the taskbar to open the
popup menu and click Task Manager to call up the Windows NT
Task Manager dialog box.
3. Click the Performance tab in the dialog box.
4. Monitor the CPU Usage until the value displayed goes below the
90 to 100% threshold.
Wait until the RSLinx icon appears in the taskbar. This assures
proper startup time of ProcessLogix services on the SERVERA
node before restarting the SERVERB node.
5. Click File
⇒
Exit Task Manager.
6. Restart the SERVERB node.
Synchronizing Other Files
The Primary SERVERA node automatically transfers ProcessLogix
database information to the Secondary SERVERB node. This transfer
includes any changes in configuration data, such as points and
displays.
Navigate in Knowledge Builder to Server and Client Configuration
Guide
⇒
Configuring and Monitoring a Redundant Server
System
⇒
Synchronizing Other Files for more information.
If you previously configured the flbkup.def file for an earlier release,
you must re-configure it for R400.0.
Upgrading Hardware
Component Firmware 1. Refer to Loading 1757-PLX52, TC-MUX021, or 1757-FIM Boot
and Personality Images on page 7-9 to upgrade the 1757-PLX52
boot and personality images to the current release level.