Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 32)

Publication 1757-IN040B-EN-P - March 2002
2-6 Operating System Installation Procedures
Setup will format the partition. This takes a few minutes to
complete.
The computer will automatically reboot. Be sure to remove
floppy disk from the floppy disk drive.
7. At the Welcome to Setup window, click Next.
If there is a delay clicking next, setup will continue the
installation automatically.
8. Verify the information on the Regional Settings screen and click
Next.
9. Enter the appropriate Name and Organization name and click
Next.
10. Enter your Windows 2000 Server Product Key and click Next.
11. Choose your Server’s Licensing Mode:
Rockwell Automation recommends that you choose the “Per
Seat” licensing option.
12. At the Computer Name and Administrator Password window:
ATTENTION
!
Certain PCs will limit the size of the partition that
you can create. Windows 2000 supports a boot
partition size up to a 32 Gigabytes on a NTFS
formatted drive.
If your system has a limitation, create the largest
partition you can, and leave the leftover space as
unpartitioned. (You can create and format the
unpartitioned space later.) The minimum partition
size required for this installation is 4 Gigabytes.
ATTENTION
!
Microsoft requires that you attain the appropriate
number of Client Access Licenses required for your
system. For ProcessLogix Systems, the total number
of clients includes other ProcessLogix Servers
(Redundant Servers), and ProcessLogix Clients.