Pre-work for systems with processlogix r320.0, Pre-work for systems with processlogix r320.0 -5 – Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide User Manual
Page 109

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Client Installation and Upgrade Procedures 5-5
If you are installing ProcessLogix Client to a Clean PC, skip
to Installing ProcessLogix R400.0 Client Software on page 5-18.
Upgrading a ProcessLogix R320.0 Windows NT 4.0 Workstation Client to a
ProcessLogix R400.0 Windows NT 4.0 Workstation Client
The following table lists the items that you must complete to upgrade
a R320.0 Windows NT 4.0 Client to a R400.0 Windows NT 4.0 Client
Pre-work for systems with
ProcessLogix R320.0
Use the procedures outlined in this section to convert an existing
R320.0 Client system to a R400.0 Client system. If you are performing a
Clean installation refer to the tables above for installation procedures.
✔
Step
Item
Page
1.
2.
3.
4.
Installing Service Pack 6a for Windows NT 4.0
5.
Installing MDAC 2.5 Service Pack 1
6.
7.
Installing Internet Explorer 5.5 SP1
8.
Installing Adobe Acrobat Reader 4.05
9.
Updating the ActiveX Support Files
10.
Installing ProcessLogix R400.0 Client Software
IMPORTANT
Be sure to logon as ps_user. If you don’t have a user
ps_user account, you must create one at this time.
Refer to Creating the ProcessLogix User Accounts on
page 2-26.