Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide User Manual
Page 130

Publication 1757-IN040B-EN-P - March 2002
5-26 ProcessLogix Client Installation and Upgrade Procedures
PLX1B is the default Server name assigned by the factory. It is
used for example purposes only.
b. Select the appropriate Station type option, Static Station or
Rotary Station.
c. Click Advanced.
d. Key in >3< as the Static Station Number or key in appropriate
update rates and display number for Rotary.
e. Check the Auxiliary Setup File checkbox.
f. Click Browse and navigate to
C:\Honeywell\Client\Station\default.stn and click Open.
8. Click Save.
9. Click Yes to save the new connection.
10. Key in >defaultb.stn< in the File name field and click Save.
11. Highlight defaultb and click Connect.
12. Click Cancel at the Unable to connect prompt, if applicable.
13. Click Station
⇒
Connect to call up the Station Connect dialog
box.
14. Highlight Default and click Edit Connection.
15. On the Connection tab, make these entries to have the Station
point to the SERVERA (PLX1A) node:
a. Key in the name or IP address of the SERVERA (PLX1A)
node specified in the Hosts file in the Server field.
PLX1A is the default Server name assigned by the factory. It
is used for example purposes only.
IMPORTANT
You must indicate the full path to the .stn file.