Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 43)

Publication 1757-IN040B-EN-P - March 2002
Operating System Installation Procedures 2-17
21. At this point in the installation, setup will finish installing
Windows 2000. This will take some time depending on your
hardware configuration.
22. At the Completing the Setup Wizard window, remove the
Windows 2000 Professional CD and click Finish.
23. The PC will reboot.
24. Continue the installation with Installing Service Pack 2 for
Windows 2000 on page 2-17.
Installing Service Pack 2
for Windows 2000 Checking for Windows 2000 Service Pack 2
Before performing this installation, check the Microsoft Windows 2000
CDs to see if they have Service Pack 2 integrated. (This depends on
when the software was purchased.) If Service Pack 2 has already been
installed, you can skip to Installing Internet Explorer 5.5 SP1 on
page 2-19.
If you are unsure of whether the source CDs included SP2, perform
the following procedure:
1. If necessary, Boot/Turn on the system.
2. Press Ctrl-Alt-Del to prompt the logon information.
3. Use the Administrator user account and enter the appropriate
password.
3. Click Start
⇒
Run.
TIP
If this is the first time start since the operating system
install, it will be necessary to remove the default
startup Screens
Professional Systems
1. On the Getting Started with Windows 2000 window, uncheck the
Show this screen at startup checkbox.
2. Click Exit.
Server Systems
1. On the Windows 2000 Configure your Server window, select the I
will configure this Server later option and click Next.
2. Uncheck the Show this screen at startup checkbox and close the
window.