Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 9)

Publication 1757-IN040B-EN-P - March 2002
Table of Contents v
Chapter 6
Additional Redundant Server
Procedures Adding Redundancy to R400.0
Non-Redundant Server Systems . . . . . . . . . . . . . . . . . 6-1
Changing the Computer Name on a ProcessLogix Server 6-1
Completing the ProcessLogix R400.0
Setup on a Redundant Server Pair . . . . . . . . . . . . . . . 6-1
Changing Hosts File Entries . . . . . . . . . . . . . . . . . . . . . 6-1
Changing TCP/IP address on a Secondary Server
(SERVERB) Node . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Changing the ProcessLogix License. . . . . . . . . . . . . . . . 6-4
Setting up Primary Server (SERVERA) node 6-6
Making Redundant Hardware File Entries . . . . . . . . . . . 6-6
Configuring the Time Service . . . . . . . . . . . . . . . . . . . . 6-8
Setting Up Secondary Server (SERVERB) Node . . . . . . . . . . 6-10
Making Redundant Hardware File Entries . . . . . . . . . . . 6-10
Configuring the Time Service . . . . . . . . . . . . . . . . . . . . 6-10
Confirming Data Link is Available. . . . . . . . . . . . . . . . . 6-10
Configuring Stations in Quick Builder (on SERVERA) . . . . . 6-11
Synchronizing Server Databases on Redundant Server . . 6-13
Confirming Databases are Synchronized . . . . . . . . . . . . 6-13
Setting up the Redundant ERDB . . . . . . . . . . . . . . . . . . 6-15
Setting Up Station on SERVERB . . . . . . . . . . . . . . . . . . . . . 6-16
Setting Up Station on SERVERA . . . . . . . . . . . . . . . . . . . . . 6-18
Restarting Redundant Servers. . . . . . . . . . . . . . . . . . . . . . . 6-21
Synchronizing Other Files . . . . . . . . . . . . . . . . . . . . . . 6-22
Upgrading Hardware Component Firmware . . . . . . . . . . . . 6-22
Checking Control Builder Operation and Logging On . . 6-23
Backing Up a ProcessLogix Server Hard Drive to Tape . 6-23
Creating an Emergency Repair Disk . . . . . . . . . . . . . . . 6-23
Chapter 7
Firmware Maintenance
Procedures 1784-PCIC Driver and Firmware Installation . . . . . . . . . . . . 7-1
Install Hardware Device Drivers . . . . . . . . . . . . . . . . . . 7-1
Verify the 1784-PCIC Driver Version . . . . . . . . . . . . . . . 7-2
Updating the 1784-PCIC Firmware . . . . . . . . . . . . . . . . 7-2
Upgrading Hardware Component Firmware . . . . . . . . . . . . 7-4
About Firmware Upgrades . . . . . . . . . . . . . . . . . . . . . . 7-4
Firmware Revision Level Reference. . . . . . . . . . . . . . . . 7-5
Important Usage Considerations . . . . . . . . . . . . . . . . . . 7-7
Loading 1757-PLX52, TC-MUX021, or 1757-FIM Boot
and Personality Images . . . . . . . . . . . . . . . . . . . . . . 7-9
Updating Firmware in CNB, ENET, IOM, SRM, PIM
or ControlNet Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Setting CNB Module NUT Timing . . . . . . . . . . . . . . . . . 7-14