Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 38)

Publication 1757-IN040B-EN-P - March 2002
2-12 Operating System Installation Procedures
4. At the DOS prompt, key in: >D:< and press Enter.
5. Key in this command:
>cd bootdisk<
and press Enter.
6. Key in this command:
>makeboot<
and press Enter.
7. Enter the letter of your floppy disk drive. >A<
8. Follow the on-screen prompts for inserting, labeling, and
creating the four floppy disks.
9. When all the boot floppies have been made, shut down the PC.
Starting the Installation from the Boot Floppies
1. With the PCs’ power off, insert the diskette titled Windows 2000
Setup Boot Disk into the floppy disk drive.
2. Turn on the PC.
3. Insert the Microsoft Windows 2000 Professional CD into the
CD-ROM drive.
4. Follow the on-screen prompts to remove and insert the
Windows 2000 Professional Setup Disks 2, 3, and 4 when
instructed to do so.
5. Continue with Completing the Windows 2000 Professional
Installation on page 2-13.
Starting the Installation from the CD-ROM
1. Turn on the PC.
2. Insert the Microsoft Windows 2000 Professional CD into the
CD-ROM drive.
IMPORTANT
Server Boot floppies and Professional Boot floppies
are different.