Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 62)

Publication 1757-IN040B-EN-P - March 2002
2-36 Operating System Installation Procedures
1. Insert the ProcessLogix R400.0 Software CD 2 into the CD-ROM
drive.
2. Click Start
⇒
Run.
3. Key in this path location in the Open entry field or use Browse
to navigate to the sp6i386.exe file on the CD.
>D:(or your CD-ROM drive letter)\nt_sp6a\sp6i386.exe<
4. Click OK to launch the Service Pack 6a setup application.
5. If a third-party system utilities message appears, click OK.
6. At the Setup window, check the boxes:
•
Accept the License Agreement
•
Backup files necessary to uninstall the Service Pack at a later
time.
7. Click Install to initiate the Service Pack 6a update.
8. If a window appears requesting you to replace a vendor
installed file, click Yes to replace the file with the one provided
by the Service Pack Setup.
9. At the Setup complete window, click Restart. The PC
automatically restarts.
TIP
If you received your Client PC from the manufacturer
with Windows NT preinstalled with 128-bit
components, you may need to download the High
Encryption Version of Service Pack 6a.
This can be obtained from Microsoft’s web site:
www.microsoft.com/ntserver/nts/downloads/recommended/SP6/allsp6.asp