Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 127)

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Client Installation and Upgrade Procedures 5-23
14. At the ProcessLogix Update Complete window, click Finish.
15. Wait until after the command windows have closed and file
copying is complete, then remove the CD.
16. At the ProcessLogix Setup Complete window, click the No, I will
restart my computer later option and click Finish.
17. Restart the PC.
Verifying ProcessLogix
Client Installation Restoring the Data
If data was saved in Saving Important Data on page 4-5 you should
restore the data.
The following table summarizes some items that should be checked
before you begin operating your ProcessLogix Client.
Check: Because:
Custom Displays
•
If the C:\Honeywell\client\abstract directory was not created,
use Windows NT Explorer to create an abstract folder in the
C:\Honeywell\client directory.
Station
Configuration File
•
The original station.ini file is renamed old_station.ini and is
replaced by a new station.ini in the
C:\WINNT directory. Any
changes made to the original file (old_station.ini) need to be
made to the new file (station.ini).
•
The old default.stn file in the C:\Honeywell\client\station directory
will be overwritten. Any changes made to the original file will
need to be made to the new file.
Station Menu
•
A new Station menu (menu.txt) is installed. This means any
configurations made to the original Station menu will be lost and
will need to be reconfigured for the new Station menu through
Station.