Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 142)

Publication 1757-IN040B-EN-P - March 2002
6-8 Additional Redundant Server Procedures
11. At DOS prompt, key in:
>cd \Honeywell\server\user<
and press .
12. Key in this command:
>hdwbld redun.hdw<
and press .
The hdwbld utility reads the text file [redun.hdw] and adds the
hardware definitions to the Server database.
If you are using a dual LAN, be certain that you change the
default redun.hdw file as noted in Step 5 to Step 8.
13. Check that no hardware build errors are listed. If errors are
listed, be sure the Server state is Database Only and retry.
14. Key in this command:
>exit<
and press to exit DOS.
Configuring the Time Service
1. Click Start
⇒
Run.
2. Key in this command in the Open entry field:
>Notepad %SystemRoot%\timeserv.ini<
3. Click OK to open the Notepad application.
TIP
The %SystemRoot% is the path to the timeserv.ini
file, such as C:\WINNT\timeserv.ini.