Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 112)

Publication 1757-IN040B-EN-P - March 2002
5-8 ProcessLogix Client Installation and Upgrade Procedures
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click on Knowledge Builder in the list of installed programs and
click Add/Remove.
4. Click Yes to confirm.
5. At the Remove Shared File prompt, click Yes to All.
6. Click Yes to confirm.
7. When completed, click OK.
Removing PsAxCtl Document EXE
This procedure is required for an R320.0 Engineering Workstation
only. If you are upgrading an R320.0 Operating Workstation, skip
to Removing Quick Builder on page 5-9.
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Select PsAxCtl Doucment EXE and click Add/Remove.
4. Click Yes to confirm.
5. If prompted to remove Shared File, click Yes to All and click Yes
to confirm.
6. When completed, click OK.
Removing Engineering Tools
This procedure is required for an R320.0 Engineering Workstation
only. If you are upgrading an R320.0 Operating Workstation, skip
to Removing Quick Builder on page 5-9.
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Select ProcessLogix Engineering Tools R320.0 and click
Add/Remove.
4. Click Yes to confirm.