Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide User Manual

Page 92

Publication 1757-IN040B-EN-P - March 2002

4-2 ProcessLogix Server Upgrade Procedures

4. Key in this command:

>NET USE T: \\PLX1\C$ /user:ps_user<

(where PLX1 is the R400.0 Server name)

and press Enter.

5. Open Windows NT Explorer and confirm that the T: drive exists.

For a Redundant Server Pair

1. Logon to the old R320.0 SERVERB as plx_user.

Use the following procedure to map a drive to the new R400.0
Backup Server.

2. Click Start

⇒

Run.

3. Key in this command in the Open entry field:

>cmd<

and click OK to open the DOS window.

4. Key in this command:

>NET USE T: \\PLX1B\C$ /user:ps_user<

(where PLX1B is the name of the R400.0 Backup Server)

and press Enter.

5. Open Windows NT Explorer and confirm that the T: drive exists.

6. Logon to the old R320.0 SERVERA as plx_user.

Use the following procedure to map a drive to the new R400.0
Primary Server.

7. Click Start

⇒

Run.

8. Key in this command in the Open entry field:

>cmd<

and click OK to open the DOS window.