Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 69)

1 Publication 1757-IN040B-EN-P - March 2002
Chapter
3
ProcessLogix Server Installation Procedures
Installing ProcessLogix
Software on a Clean PC Rockwell Automation delivers ProcessLogix Server with all the
required software pre-installed. The following instructions can be
used if the system has to be reinstalled or for new installations on a
PC that was not purchased from Rockwell Automation.
The following table lists the items that you MUST complete before
attempting to install the ProcessLogix software. If you are installing
ProcessLogix software on a redundant Server pair you must complete
the items on SERVERA then repeat the same items for SERVERB.
✔ Step Item Page
1. Clean System Windows 2000 Server
Installation 2-1
2. Installing Service Pack 2 for Windows 2000 2-17
3. Installing Internet Explorer 5.5 SP1 2-19
4. Installing Adobe Acrobat Reader 4.05 2-22
5. Additional Operating System Customization
Procedures 2-22
6. Creating an Emergency Repair Disk 2-25
7. Creating the ProcessLogix User Accounts 2-26
IMPORTANT
PC Naming Requirements
If you are installing ProcessLogix software on a
redundant Server pair, be certain that the computer
names end with the letters A and B for the Primary
and Secondary Servers, respectively. For example,
use the name PLX1A for the Primary Server
(SERVERA) and PLX1B for the Secondary Server
(SERVERB)
If you are installing ProcessLogix software on a
non-redundant Server, be certain that the computer
name DOES NOT end with the letter A or B.