Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 33)

Publication 1757-IN040B-EN-P - March 2002
Operating System Installation Procedures 2-7
•
Enter the Computer Name.
•
Enter the Administrator password.
•
Confirm the password.
•
Click Next.
13. At the Windows 2000 Components window:
•
Uncheck the box for the Internet Information Services (IIS)
ATTENTION
!
The base name cannot contain more than 13
alphanumeric characters and must contain no spaces.
The full computer name cannot contain more than
14 alphanumeric characters. The following naming
conventions are required for given ProcessLogix
system architectures.
For non-redundant Server, be sure the name does
not end in the letter “A” or “B”. The default name is
PLX1.
For redundant Servers, append a letter to the base
name to identify the PC’s function in the system
architecture beginning with the letters A and B for
the primary and secondary Servers, respectively. For
example, use the name PLX1A for the primary Server
(SERVERA) and PLX1B for the secondary Server
(SERVERB). (14 Character total: Up to 13 Base plus
A or B)
For a ProcessLogix Client, be sure the name does not
end in the letter “A” or “B”. The suggested name is
STNxx, where xx is the Station Number (01-20).
IMPORTANT
Be sure to document the Administrator Password. (It
is required later in the procedure.) The Administrator
Account and password gives a user full access to the
system. Care should be taken to who has access to
this information.
ATTENTION
!
In the next section, you have the ability to add
many services and options during the Server
installation. These components are not required for
the base operation of the ProcessLogix R400.0
Software. If any of these components are needed
for a custom installation, they can be added later
after the installation.