HP Storage Essentials NAS Manager Software - Manual (Page 93)

Storage Essentials 5.1 User Guide 61
Discovering 3PAR Storage Systems
NOTE: You do not need to provide the interop namespace because the management server
includes the interop namespace for 3PAR storage systems in its default list.
IMPORTANT: To be able to discover a 3PAR storage system, the SMI-S server for the 3PAR
storage system must be running. By default, the 3PAR SMI-S server is not started on the array. To
start the SMI-S server, bring up the InForm CLI and run the following command:
startcim
This command starts the SMI-S server within a minute or so.
Discovery from HP SIM
To discover a 3PAR storage system, provide the following information in HP Systems Insight
Manager:
• Provide the IP address or system name for the storage system. See ” Adding an IP Range for
Scanning ” on page 24 or ” Adding a Single IP Address or DNS Name for Discovery ” on
page 25 for more information.
• User name of the storage system.
• Password of the storage system.
Xiotech Storage
Systems
Discover the storage system
directly.
See ” Discovering Xiotech Storage
Systems ” on page 78.
HP NAS Devices Discover the device directly. See ” Discovering HP NAS
Devices on Windows ” on
page 79 and ” Discovering HP
NAS Devices on Linux ” on
page 80.
NetApp Devices Discover the device directly. See ” Discovering NetApp NAS
Devices ” on page 82.
Sun NAS Devices Discover the server running the
SMI-S provider for the Sun NAS
Devices.
See ” Discovering Sun NAS
Devices ” on page 83.
HP and IBM Tape
Libraries
Provide the IP address,
namespace, user name and
password for the tape library.
See ” Discovering HP and IBM
Tape Libraries ” on page 84
Table 11 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information