HP Storage Essentials NAS Manager Software - Manual (Page 364)

Provisioning Manager 332
1 The ability to create, modify, and remove zone aliases, zones, and zone sets.
2 Also applies to EMC Connectrix switches.
3 Also applies to Sun StorEdge SNMP switches.
4 SANbox-2 only
5 Soft zoning is only support for Cisco SMI-S switches. See ” soft zone ” on page 688 in the
Glossary for more information. Hard zoning is not supported on Cisco SMI-S switches.
Issues for Sun StorEdge and QLogic SNMP (Simple Network Management Protocol) switches:
• Active zoning is not reported for Sun StorEdge and QLogic switches that have the SNMPv1
Agent. Switches that do report active zoning, do not supply information about inactive zones to
the management server.
• If a zone alias for a Sun StorEdge or QLogic switch is a member of an active zone, the zone
alias is not shown in the user interface, but its members are displayed as belonging to the
active zone.
Issues for QLogic SMI-S switches:
2 McDATA
SNMP
through
proxy
N N N N N Y
2 McDATA
SNMP to
switches
Y N N N N Y
Cisco SNMP Y N Y N N Y
Cisco SMI-S 5 Y Y Y Y N Y
CNT SMI-S Y Y N N N Y
4 QLogic
SNMP
Y
3 N N N N Y
4 QLogic
SMI-S
Y Y Y Y N Y
Table 50 Zoning Support
Switch
Type
View
Active
Zones
View
Inactive
Zones
View
Aliases
Zone/
Zone Set
Provisioning 1
Zone Set
Copying
Port
Statistics