HP Storage Essentials NAS Manager Software - Manual (Page 301)

Storage Essentials 5.1 User Guide 269
When you access System Manager, the information you entered appears in the topology.
Arranging Elements in the Topology
To improve usability, arrange the topology so it suits your environment. For example, if you plan to
filter various fabrics, you might want to arrange the topology so that elements are arranged by
fabric. This way when you filter the fabrics, large gaps do not appear in the topology. You can
arrange elements individually or in groups, as described in the following sections.
NOTE: The topology displays direct attached connections as a dotted line from the host to the
storage system. To view direct attach storage, you must enable the button. See Table 32 on
page 248 for more information.
To arrange elements individually:
1. Click the button.
2. Click the element you want to move and drag it to a new location.
3. Repeat the previous step for each element you want to move.
The management server provides buttons to help you with viewing and arranging the topology.
To learn more about those buttons, see ” About the Toolbar in System Manager ” on page 248.
4. Once you have finished arranging the topology, click the button to save it.
5. To learn more about filtering fabrics, see ” Filtering Fabrics ” on page 280.
To arrange elements in a group:
1. Click the button.
2. Holding down the mouse button, drag the mouse diagonally across the elements you want to
move. Then, lift your finger off the mouse button when you are done.