HP Storage Essentials NAS Manager Software - Manual (Page 468)

Path Provisioning 436
IMPORTANT: (McDATA switches only) Path Provisioning looks for the names of the active zone set
and of the active zones and all of their saved counterparts in the zoning library in EFC Manager.
The provisioning job only occurs if those names match.
Creating a Zone
To create a zone:
1. Select a fabric in the zone pane.
2. Click the button located above the Zone pane.
3. Type a zone name in the dialog box. The following restrictions apply:
Naming Conventions for Brocade Switches
:
• The name must contain 1 to 64 characters.
• The name must begin with a letter. Any character other than the first character can be a
letter, a number (0 to 9), or an underscore (_).
• The name is case sensitive. For example, “Zone1” and “zone1” are different zones.
• You cannot create a zone with the same name as an existing zone, zone alias or zone set.
For example, if you create a zone named “new”, you cannot give a zone, zone alias, or
zone set the same name.
• The following characters are invalid for Brocade switches: caret (^), dash (-), and dollar sign
($).
Naming Conventions for McDATA and Connectrix Switches :
• The name can have a maximum of 64 characters.
• The first character of a zone name must be a letter (A-Z, AZ).
• A zone name cannot contain spaces.
• Valid characters are a-a, AA, 0-9, caret (^), dash (-), underscore (_), and dollar sign ($).
• All names must be unique and may not differ by case. For example, myzone and MyZone
are considered to be the same zone.
4. Click OK.
The new zone is added to the Zone pane.
5. Click the Create Job button.
The job is added to the bottom pane.
6. Do one of the following:
• If you want the job to execute now, click the Execute Job ( ) button
• If you want the job to execute at a later time, schedule the job as described in the topic,
” Scheduling Provisioning Jobs ” on page 443.
Volume Assignment
Keep in mind the following: