HP Storage Essentials NAS Manager Software - Manual (Page 632)

Managing Policies 600
IMPORTANT: Since the severity level for an element is set by the manufacturer, the
meanings of the severity levels vary. It is best to view the description of the event.
• Unknown - The severity level is not known.
• Informational - An example of an informational event is a progress report event for
firmware download operation currently in progress.
• Warning - An example of a warning is one or more new physical fabric objects (device
port, switch, or fabric) have appeared.
• Minor - An example of a minor event is a physical fabric object (switch port or fabric) has
changed state.
• Major - An example of a major event is one or more physical fabric objects (device port,
switch, or fabric) have disappeared.
• Critical - An example of a critical event is Brocade switches that have a failed firmware
download and the failure reason code for each respective switch.
4. After you select an event level, click OK.
5. Click the Finish button.
Providing a Custom Command for a Policy
You can configure Policy Manager to run a custom command on the management server when an
element is being overused or when any of the following occurs:
• A new element is discovered
• Successful provisioning occurred
• An event occurred on one or more specified elements
The following instructions assume you have already created a policy. If you have not created a
policy, see the following topics:
• ” Creating a Utilization or Backup Policy ” on page 581
• ” Creating Policies for Discovery ” on page 585
• ” Creating Policies for Provisioning ” on page 587
• ” Creating Policies for Events ” on page 588
To set up a custom script for a policy:
1. Access Policy Manager as described in ” Accessing Policy Manager ” on page 580.
2. Click the button corresponding to the policy you want to modify.
3. Click the Execute Custom Command button.
4. Type a command that will execute the script in the field. Then, click OK. The software assumes
you are in the %JBOSS4_DIST%\server\appiq\remotescripts directory on the
management server when the script is executed. You can use environment variables in your
script, such as POLICY_NAME and POLICY_DESCRIPTION. POLICY_NAME. POLICY_NAME