HP Storage Essentials NAS Manager Software - Manual (Page 133)

Storage Essentials 5.1 User Guide 101
Removing an Element from Quarantine
To remove an element from quarantine:
1. Select the check boxes for the elements you want to remove from quarantine on the Discovery
Data Collection page for Discovery from HP SIM or Get Details page for Discovery from HP SE.
Quarantined elements appear with a flag ( ) in the Quarantined column on the Discovery
Data Collection page for Discovery from HP SIM or Get Details page for Discovery from HP SE.
2. Click the Clear Quarantine button.
3. When you are asked if you want to remove the selected elements from quarantine, click OK.
The next time you perform Get Details/Discovery Data Collection for the element, the
management server gathers data from the element.
Updating the Database with Element Changes
After you have initially discovered the elements, information about them might change. To update
database with these changes, perform the steps described in this section.
Keep in mind the following:
• If you change the password of a host after you discover it, you must change the password for
the host in the discovery list. Then, you must stop and restart the CIM Extension running on that
host before you run a discovery.
• If you are adding, removing or replacing McDATA or Connectrix switches, you must perform
different steps. See the topics, ” Adding McDATA and EMC Connectrix Switches ” on page 96,
” (Discovery from HP SE Only)Removing McDATA and EMC Connectrix Switches ” on page 96,
and ” (Discovery from HP SE Only)Swapping McDATA and EMC Connectrix Switches ” on
page 97.
• (Discovery from HP SE only)Get Details takes some time. You might want to perform this process
when the network and the managed elements are not busy. To obtain a picture of device
connectivity quickly, click the Get Topology button on the Topology tab.
Discovery from HP SIM
1. Click Options > Storage Essentials > Discovery > Run Discovery Data Collection.
2. Select Include infrastructure details, which gathers information about SAN details. Include
backup details
is used for gathering information for Backup Manager. You do not need to
select Include backup details unless you have already discovered hosts running backup
applications and installed CIM Extensions on those hosts. See ” Step 1 - Discovering Your Hosts
and Master Backup Servers ” on page 105 for more information about discovering master
backup servers. The Include backup details option gathers the latest information about your
backup applications.
3. The management server obtains most of its information from device managers for storage
systems with external databases, such as HP, HDS, and EMC storage systems. Select Force
Device Manager Refresh
if you want the management server to tell the device managers for
your storage systems to obtain the latest information. If you do not select Force Device
Manager Refresh
, the management server gathers information from the external databases
with the assumption the information in the external database is up to date. See the following