beautypg.com

Managing collectors for file system viewer, 21 about the collectors for file system viewer – HP Storage Essentials NAS Manager Software User Manual

Page 225

background image

Storage Essentials 5.1 User Guide 193

Managing Collectors for File System Viewer

IMPORTANT:

All collectors are stopped during Get Details and Discovery Data Collection. This

means that during Get Details and Discovery Data Collection data, such as for File System Viewer,

is not updated.

NOTE:

It is not possible to run data collectors on quarantined elements. Attempting to run data

collectors on quarantined elements will result in exceptions in the appiq.log file.

The management server uses File System Viewer data collectors to obtain information from a file

server. File System Viewer provides information about a file server, such as the number of its

directories. While File System Viewer data collectors are obtaining information from a file server, a

second File System Viewer data collection cannot begin.
To manage collectors for File System Viewer:

1.

Click Reports > Storage Essentials > Data Collection > File System Viewer Data in HP

Systems Insight Manager.

2.

Verify the Data Collection tab is displayed.

Table 21

About the Collectors for File System Viewer

Column Heading

Description

File Server

The name of the file server from which this collector gathers

information.

Volumes

The volumes selected for scanning on a file server. Volumes selected

for “Scan now” are not listed.

Next Scheduled

Run

Displays the date and time when the collector is scheduled to run.

Interval

The interval in minutes the collector runs.

Running?

Gives the status of the collector. Collectors that are scheduled to run

display a check mark in this column.

Start/Edit

If no schedule has been created for a a file server, this column displays

a Start button. Click the Start button to to create a schedule. See

Setting Data Collection Properties

” on page 194 for more

information.
If a schedule has been created, this column displays an Edit (

)

button. Click the Edit button to edit the schedule for running a

collector. See

Setting Data Collection Properties

” on page 194 for

more information.