HP Storage Essentials NAS Manager Software - Manual (Page 491)

Storage Essentials 5.1 User Guide 459
Unclearing Events
You can unclear events by doing one of the following:
• Click the Set this Event to Not Cleared button in the Event Details pane
• Select the check box to the left of the event and click the Undo Clear button in Event Manager.
You can unclear multiple events at once by select them and then clicking the Undo Clear
button.
• Right-click an event in Event Manager and select the Mark as NOT Cleared option from the
drop-down menu. This menu does not appear if you right-click the summary text link.
Configuring the Clearing of Events
Depending on the severity of an event, the management server may mark the event as “clear” after
60 minutes. Events designated as Major and Critical are never marked as “clear.” You can change
the time delay in clearing an event, and you can specify that the management server never marks
an event as “clear”.
To help you in filtering events, you may want to have unimportant events marked as cleared rather
than automatically deleted. Depending on how you have configured the deletion of events, you
can view the “cleared” events at a later time.
See the following table for the default settings for clearing events.
To change the default time delay to clear an event, do the following:
1. Access the Events page by clicking Configuration > Events.
2. Do one of the following:
• If you never want an event of the specified severity level marked as “cleared,” select the
Never option next to the severity level.
• If you want to change the delay time in clearing an event, select one of the following units of
measurement from the combo box and type the number in the adjacent field:
• Minutes
• Hours
Table 72 Default Settings for Clearing Events
Severity Level Default Time Delay to Clear the Event
(Hours)
Unknown 1
Informational 1
Warning 1
Minor 1
Major Never
Critical Never