HP Storage Essentials NAS Manager Software - Manual (Page 454)

Path Provisioning 422
Information about the selected storage system, such as its model and IP address is displayed
below the Storage System pane. The Host pane becomes populated. Notice in the following
pane that some hosts have a red X over their icon. This means the host is not accessible.
Figure 54 Selecting a Storage System
Step 2 - Select a Host
1. Wait for all data to be loaded. You can tell if all data has been loaded when you see the
following messages:
• Loading host data finished.
• Loading volume data finished.
• Loading HSG data finished.
The Step 2 button appears disabled until data has been loaded
2. Do one of the following:
• Select a host that is reachable.
• Add a host that is not currently connected to the network by clicking the button. See
” Adding a Host ” on page 423.
Keep in mind the following: