HP Storage Essentials NAS Manager Software - Manual (Page 105)

Storage Essentials 5.1 User Guide 73
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses
tab.
Discovering HP XP Arrays by using XP Provider for Storage Essentials
To discover HP StorageWorks XP arrays by using XP Provider for Storage Essentials, you must enter
the following information for the XP array:
• user name and password used for accessing the XP array
• IP address of the XP array
Discovery from HP SIM by Using XP Provider for Storage Essentials
To discover HP storage systems by using XP Provider for Storage Essentials, provide the following
information in HP Insight Manager:
• IP address or system name of the XP storage system you want to discover. See ” Adding an IP
Range for Scanning ” on page 24 or ” Adding a Single IP Address or DNS Name for Discovery ”
on page 25 for more information.
• User name for accessing the XP storage system.
• Password for accessing XP storage system.
Discovery from HP SE by Using XP Provider for Storage Essentials
To discover HP storage systems by using XP Provider for Storage Essentials:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the XP storage system
you want to discover.
6. Enter the User Name used to access the XP storage system.
7. Enter the Password used to access the XP storage system.
8. If you typed a password in the previous step, retype the password in the Verify Password
field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses
tab.