HP Storage Essentials NAS Manager Software - Manual (Page 379)

Storage Essentials 5.1 User Guide 347
To change the amount of information collected:
1. ClickOptions > Storage Essentials > Manage Product Health. Then, click Advanced in the
Disk Space tree.
2. Click Show Default Properties at the bottom of the page.
3. Copy the following command. How you copy the text depends on your Web browser. If you
are using Microsoft Explorer or Netscape Navigator, select the text and then right-click the
selected text. Then, select Copy.
cimom.cisco.displayZoneDatabase=primary
4. Return to the Advanced page (Options > Storage Essentials > Manage Product Health.
Then, click Advanced in the Disk Space tree).
5. Paste the copied text into the Custom Properties field. How you paste the text depends on
your Web browser. If you are using Microsoft Explorer or Netscape Navigator, right-click the
field and select Paste.
6. Change the value of cimom.cisco.displayZoneDatabase. Make your changes in the
Custom Properties field. For example, to set the value of
cimom.cisco.displayZoneDatabase to all, you would change the value from primary to
all as shown in the following example:
cimom.cisco.displayZoneDatabase=all
7. When you are done, click Save.
8. Restart the service for the management server for your changes to take effect.
While AppStorManager is restarting, users are not able to access the management server. The
AppStorManager service must be running for the management server to monitor elements.
About the Messages Displayed in the Brocade
Console
If you see the following messages in the Brocade Console, you can ignore them. It is just the
management server talking to the Brocade switch and subscribing to the event service.