Metrohm tiamo 1.1 Manual - Manual (Page 801)

Determinations 773
Modify variables
5. Open
tab Variables .
6. Select desired variable.
7. Click on [Modify] .
The dialog window Modify variable opens.
8. Enter new Value for the variable and click on [OK] .
9. Click on [Recalculate] .
The selected determinations are recalculated. The results of this recalculation are
entered automatically in the subwindow
Result view .
Note
If a variable is modified then with [Recalculate] all the selected determinations
will be recalculated with the new value. If one variable is not modified then when
several determinations are recalculated the original value of the variable will be
used (i.e. variables with the same name but different values will not be overwrit-
ten until they are deliberately altered).
10. In the Reprocessing window, click on [OK] .
Each determination that has been modified by reprocessing will be saved as a
new version with a version number increased by +1 and the subwindow Reproc-
essing will be closed. This button is inactive when the recalculation has not yet
been triggered and if not all the selected determinations could be reprocessed.
Modify method
Note
The method can only be modified if the method is identical for all the determina-
tions that have been selected.
5. Open tab Method .
6. Click on [Modify method] .
The dialog window Method editor opens.
7. Modify method as desired and click on [OK] .
Here it is possible to modify parameters from existing commands as well as to in-
sert and delete tracks and commands.
8. Click on [Recalculate] .
The selected determinations are recalculated. The results of this recalculation are
entered automatically in the subwindow
Result view .
9. If desired, save the modified method under the same name or under a new name
by clicking on
[Save as...] .
If the modified method is saved under the name of an existing method then all the
earlier method versions will be deleted and a new version will be generated with
the number
1 .
10. In the Reprocessing window, click on [OK] .
Each determination that has been modified by reprocessing will be saved as a
new version with a version number increased by +1 and the subwindow Reproc-
essing will be closed. This button is inactive when the recalculation has not yet
been triggered and if not all the selected determinations could be reprocessed.