Metrohm tiamo 1.1 Manual - Manual (Page 729)

Subwindow Devices 701
Device serial number
Shows the serial number of the device.
Set to work
Shows the date on which the device was automatically added to the device
table.
Working hours
Shows the number of operating hours (only for 778, 789, 814, 815, and 855
devices).
Data storage under legal control
on, [ off ]
This option must be enabled if the balance has its own data memory (only
for Sartorius balances).
Remarks
1000 characters, [ empty ]
Remarks about the device.
This button is only shown with a balance or barcode reader. In order to de-
lete the device from the device list the device must be disconnected.
RS 232
COM Port
COM1, COM2, ..., [ first free COM port ]
Selects the serial interface on the PC to which the balance is connected.
Baud rate
300, 600, 1200, 2400, 4800, [ 9600 ], 19200
Transmission speed.
Data bit
7, [ 8 ]
Number of data bits.
Parity
[ none ], odd, even
Type of parity check.
Stop bit
[ 1 ], 2
Number of stop bits.
Handshake
[ None ], HW, SW
Type of data transmission protocol.