Metrohm tiamo 1.1 Manual - Manual (Page 588)

560 Method
REPORT
Command for the output of determination data.
Appearance
The command has the following appearance:
Parameters
The parameters for the command REPORT are configured in the following dialog
window:
•
REPORT
Note
A REPORT command has to be placed before a DATABASE command. Otherwise
the command data (for example the report template used) are not stored and a
Reprocessing won't be possible then.
REPORT - Properties
Command name
25 characters, [ Report # ]
Name of the command.
Report template
Report template
Report templates
Selecting the predefined Report template which the report should be gen-
erated with.
Report output
Printer
[ on ], off; Printer name, [ Default printer ]
The report is printed to the selected printer if this option is activated. In De-
fault printer is selected, the report will be printed to the default printer de-
fined for the client.