Metrohm tiamo 1.1 Manual - Manual (Page 649)

Configuration data 621
Restore configuration data
Proceed as follows to restore a configuration database that has been backuped
manually or automatically:
1 - Close tiamo
• tiamo light, tiamo full
Close tiamo.
• tiamo multi
Make sure that tiamo is closed on all clients connected to the server
and on the server itself.
2 - Start restore program
• tiamo light, tiamo full
Start ConfigRestore.exe in the program directory ...\tiamo\bin .
• tiamo multi
Start ConfigRestore.exe in the program directory ...\tiamo\bin on the
server.
3 - Select backup file and start restoring
The dialog window Restore configuration data opens:
Backup directory
Select backup directory, [ Default backup directory ]
Selection of a directory predefined in the Program administration that con-
tains the backed up configuration database.
Backup name
Select backup files
Selection of a backup file.
Backup date
Shows the time at which the configuration database was backed up. This
information is not available if the backup file is on a network drive.
Database name
Shows the name of the configuration database. This information is not
available if the backup file is on a network drive.
Size
Shows the size of the configuration database in KB.
Save as
50 characters, [ New database ## ]
Name under which the configuration database will be recovered.
Start database recovery. After the start a progress bar appears in the win-
dow. When the backup has been completed the dialog window closes
automatically.