Metrohm tiamo 1.1 Manual - Manual (Page 171)

Subwindow Run 143
Data import
Switches the import of external data on and off for working sample table fields.
Import from balance
on, [ off ]
If this option is switched on then external data from the selected balance
will be imported into the working sample table. Data can be imported into
the fields
ID1...ID4 , Sample size and Sample size unit .
Note
In order to be able to import sample identifications from the balance the data
export must be set accordingly on the balance (use names
ID1 , ID2 , ID3 , ID4 ).
Balance
Device name
Selection of the balance from which data is to be imported.
Always accept data
[ on ], off
If this option is selected then the data transmitted from the balance will be
imported into the working sample table for which this balance has been de-
fined as the data source.
Accept data only for active window
on, [ off ]
If this option is selected then the data transmitted from the balance will only
be imported into the working sample table of the workplace which has the
focus.
Import from barcode reader
on, [ off ]
If this option is selected then external data from the selected barcode
reader will be imported in the working sample table. The field into which the
data is to be imported is defined in the device properties of the Barcode
reader.
Barcode reader
Device name
Selection of the barcode reader from which data is to be imported.
Always accept data
[ on ], off
If this option is selected then the data transmitted from the barcode reader
will be imported into the working sample table for which this barcode reader
has been defined as the data source.