Metrohm tiamo 1.1 Manual - Manual (Page 223)

Report templates 195
non-proportional
Non-proportional enlargement or diminishment.
Line
Any line can be inserted in the report template.
Insert
In order to insert a line in a report template the corresponding symbol must
be selected on the Module bar and then placed on the report template by
creating a field with the left-hand mouse key.
Properties
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page height) mm
y-position within the permitted section.
Length
0.0 ... (max. page width) mm
Length of the line.
Angle
0.000 ... 360.000 °
Angle of the line.
Thickness
0.1 ... [ 0.5 ] ... 10.0 mm
Thickness of the line.
Selection of the line color.
Selection of the type of line.
Rectangle
Any rectangle can be inserted in the report template.
Insert
In order to insert a rectangle in a report template the corresponding symbol
must be selected on the Module bar and then placed on the report tem-
plate by creating a field with the left-hand mouse key.
Properties
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page height) mm
y-position within the permitted section.
Width
0.0000 ... (max. page width) mm
Width of the rectangle.