Metrohm tiamo 1.1 Manual - Manual (Page 206)

178 Database
Align to grid
Switch alignment to grid on and off.
Module-specific toolbar
Depending on the module selected in the report template, other symbols and in-
put fields are shown below the General symbol bar, with which the properties of
these modules can be directly edited (for details please refer to Modules).
Module bar
Select modules
If this option is switched on then modules in the report template can be
selected, diminished/enlarged and moved.
Text field
If this option is switched on then text fields can be inserted in the report
template.
Data field
If this option is switched on then data fields can be inserted in the re-
port template.
Date field
If this option is switched on then date fields can be inserted in the re-
port template in which the actual date is entered.
Time field
If this option is switched on then time fields can be inserted in the re-
port template in which the actual time is entered.
Page number
If this option is switched on then fields can be inserted in the report
template in which the page number is entered.
Number of pages
If this option is switched on then fields can be inserted in the report
template in which the number of pages is entered.
Fixed report
If this option is switched on then fixed reports can be inserted in the
report template.
Image
If this option is switched on then images can be inserted in the report
template.
Line
If this option is switched on then lines can be inserted in the report
template.
Rectangle
If this option is switched on then rectangles can be inserted in the re-
port template.
Curve
If this option is switched on then curves can be inserted in the report
template.
Calibration curve
If this option is switched on then calibration curves can be inserted in
the report template.