Metrohm tiamo 1.1 Manual - Manual (Page 347)

Commands 319
Type
[ Text ], Number, Date/Time
Selection of the type of the variable. This parameter is inactive for the
method variables Sample Size , Sample size unit , Sample position .
Assignment
[ on ], off
ID1 ... ID8, Sample size, Sample size unit, Sample position
If this option is enabled, a sample variable can be selected which will be
assigned to this method variable. Only those variables are selectable which
are not yet assigned. Sample data variables not assigned to a method vari-
able are not selectable in other commands and are not stored in the deter-
mination either. No formulae can be entered in this field.
Note
For the sample data variables ID1 ... ID8 , Sample size , Sample size unit , Sample
position the name of the assigned method variable will be shown automatically
on the tab Single determination in the window Run as well as on the tab Sample in
the subwindow Information .
Value
on, [ off ]
-1.0E-99 ... 1.0E+99 (for Type = Number )
100 characters (for Type = Text )
'Date' (for Type = Date/Time )
If this option is enabled, any value can be assigned to the method variable.
The date has to be entered in the calendar window for variables of the type
Date/Time .
Check at start
[ on ], off
If this option is enabled, the start check will check if the method variable is
valid and if the limits are met when monitoring is switched on.
Note
Switching off this option can be useful if the method variable is invalid at the start
of the method because it will be defined in a
REQUEST command during the run.
Comment
1000 characters
Comment about the method variable.
Variable monitoring
on, [ off ]
The limits for the variable will be monitored while the determination is run-
ning if this option is enabled. The monitoring cannott be activated for
method variables of the type Text .
Lower limit
10 numbers (for Type = Number )
'Date' (for Type = Date/Time )
Lower limit for the variable.
Upper limit
10 numbers (for Type = Number )
'Date' (for Type = Date/Time )
Upper limit for the variable.