Metrohm tiamo 1.1 Manual - Manual (Page 640)

612 Configuration
Start password
24 characters
With 6 *-characters the invisible Start password is shown, which must be en-
tered the first time that a new user logs in or that a user must enter after a
change in status from
disabled or removed to enabled . When adding a new
user or after a change in status to enabled the Administrator must issue a
new start password. When the user has logged in with the start password
and then entered a new password then the start password is deleted again.
Opens the dialog window Start password . This button is only active for users
with the status enabled . If a user has forgotten his/her password then the
Administrator can issue a new start password here.
User group
Selection of the defined user group
Current user group. The Administrator can alter the group to which the user
belongs. The user is automatically moved to the new group. A user can
also be moved to a new group with Drag&Drop.
Remarks
Possibility of entering additional user information (e.g. position, address).
Add user
There are two ways of adding a new user:
• Select user group and the context-sensitive menu item
Add user .
• Select user group and press button .
In both cases this opens the dialog window Add user .
User
24 characters
Short name of new user that must be used to log in at program start. After
the name has been entered a Start password must be issued with which
the user is entered in the list of users.
Set start password
With this button in the dialog window User administration a start password
can be issued for the selected user. It is only active for newly added users
or for those that have achieved the active status again. The dialog window
Start password opens:
Start password
25 characters
Enter a new start password. Password options are not used for the start
password.