Metrohm tiamo 1.1 Manual - Manual (Page 793)

Backup 765
4. Select or enter Backup name . If an existing backup file is selected it will be overwrit-
ten.
Note
If the backup directory is on a network drive the backup date should be added
manually to the Backup name because the backup date information is not avail-
able on restoring.
5. Start manual backup of the configuration database with [Start] .
Backup database automatically
1.
Select program part Configuration.
2. Click on menu item File, Backup, Automatically .
The window Backup configuration data automatically opens.
3. Enable the option Automatic backup .
4. Enter Interval for backup monitoring or date for Next backup .
5. Select Backup directory .
6. Close window Backup configuration data automatically with [OK] .
Export methods
1.
Select program part Method.
2. Click on symbol or menu item File, Method manager... .
3. The window Method manager opens.
4. Select desired Method group .
5. Select desired methods.
6. Click on menu item Edit, Export.. ..
7. The window Select directory for export opens.
8. Select the directory where the method should be exported and click on [OK] .
9. The selected methods are each exported as files named as 'Method name'.mmet .
Note
The exported methods are stored uncoded but with a checksum. In case a file
stored in this manner is being manipulated, it cannot be imported again.