Metrohm tiamo 1.1 Manual - Manual (Page 342)

314 Method
• START
Start command for Main track.
• STAT pH
STAT titration with pH electrodes (measurement quantity pH)
• STAT U
STAT titration with metal electrodes (measurement quantity U).
•
STDADD auto
Standard addition with automatic addition of the standard addition so-
lution using a dosing device in such a way that a constant potential
difference results.
• STDADD dos
Standard addition with automatic addition of the standard addition so-
lution using a dosing device.
• STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
• STIR
Controlling a connected stirrer.
• SWING
Swinging of the robotic arm (with Swing Head only).
• TRACK
Start command for Normal track.
•
TRANSFER
Data transfer via RS232 to external devices.
• WAIT
Interrupt the method run.
5.6.4 Track commands
The following track commands exist for the different tracks:
• START
Start command for Main track.
• TRACK
Start command for Normal track.
• SERIES START
Start command for Series start track.
• SERIES END
Start command for Series end track.
• EXIT
Start command for Exit track.
• ERROR
Start command for Error track.
• END
End command for all tracks.