Metrohm tiamo 1.1 Manual - Manual (Page 561)

Commands 533
EMPTY
Command for emptying cylinder and tubing of a dosing unit.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 855
Dosing Interface: 846
Sample Processor: 778, 789, 814, 815, 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command EMPTY are configured in the following dialog
window:
• EMPTY
EMPTY - properties
Command name
25 characters, [ Empty # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selection of a device from the device table. Only those devices being able
to execute the command are selectable. Additionally, not defined can be se-
lected. In this case, the device name must be assigned by the user at the
start of the method.
Device type
Device types, [ Titrando ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.