Metrohm tiamo 1.1 Manual - Manual (Page 186)

158 Database
Sign/Signature 1...
Sign selected determinations on level 1.
Sign/Signature 2...
Sign selected determinations on level 2.
Show method...
Show the method used for the focused determination.
Show history...
Show all versions of the focused determination in the determination
overview.
Make current
Make the old version selected in the history view the current version
again.
Show calibration curve...
Show calibration curve for the focused determination.
Control chart...
Show control chart and statistical evaluation for the selected determi-
nations.
Overlay curves...
Overlay curves of the selected determinations.
Reprocess...
Reprocess selected determinations.
Delete
Delete selected determinations.
Report templates/Open...
Open report template.
tiamo Help
Open tiamo Help.
4.1.5 Subwindows
Selection
In the main window the following 6 subwindows can be shown:
• Determination overview
Overview of the determinations stored in the database. This subwin-
dow is always shown.
• Information
Shows the information about the focused determination.
• Results
Shows the results for the focused determination.
•
Curves 1...5
Shows the curves for the focused determination.
Presentation
The subwindows can be enlarged and diminished as required by dragging the
separating bar between the windows.
With a click on the button at the top right the subwindow can be maximized, so
that only 1 subwindow can be seen in the main window. With a further click on the
button in the maximized subwindow the original view showing all subwindows
appears again.