Metrohm tiamo 1.1 Manual - Manual (Page 707)

Subwindow Devices 679
Stop determination
The running determination will be automatically terminated. The following
message must be confirmed with [OK] .
778/789 Sample Processor
The parameters for the 778 Sample Processor and 789 Robotic Sample
Processor XL are set on the following tabs:
• General
General device information such as device name, device type, serial
number, etc.
• Tower #
Properties of Tower 1 and Tower 2 (if present).
•
Rack
Information about the attached rack.
• MSB #
Properties of MSB connections 1...3 and the peripheral devices con-
nected to them.
•
RS232
Selection of the serial interface to which the device is connected.
• GLP
Information about GLP test and GLP monitoring.
General
Device name
50 characters, [ device type number_# ]
Name of device (can be freely defined by user).
Device type
Shows the type of device.
Program version
Shows the program version of the device.
Opens the dialog window Load new program version . This button is only ac-
tive when the device has an old program version that is not supported by
tiamo which can be updated by tiamo itself.